Parking Tiles Manufacturer Since 2015 · Morbi, Gujarat

+91 88661 52115

ankur@parkingtile.com

ParkingTile.com
WhatsApp

HOME / 400×400 PARKING TILES

THE BALANCED PARKING FORMAT

400×400 mm (16×16 Inch)
Parking Tiles

Explore 400×400 mm parking tiles—commonly known as 16×16 inch parking tiles—for driveways, residential car parking and outdoor projects. Compare ordinary and digital designs, technical specifications, price factors and installation requirements in one place.

Check specifications
400 mm
Actual metric size
16×16
Common market name
1

Digital

400×400 mm
Primary product specification
≈ 15.75 in
Exact metric-to-inch conversion
16×16 in
Familiar nominal market name
Outdoor
Parking, driveway and entrance use

WHY THIS SIZE

A balanced format for confident outdoor layouts.

The 400×400 mm format offers a balanced square module for residential parking, driveways and broader entrance areas. Compared with smaller formats, it can create a calmer surface rhythm with fewer joints while remaining practical to plan around edges and site features.

Choose the visual style first, then confirm grip, thickness, expected vehicle load and installation conditions before ordering.

16×16 Inch

Balanced scale. Designed around the square.

The larger square supports straight, diagonal and repeating layouts with a more open visual rhythm. The final pattern, joint width and quantity depend on the selected tile design and installation plan.

PERFORMANCE CHECKLIST

What makes a 400×400 parking tile suitable for outdoor use?

A parking surface works as a complete system. The tile, base, adhesive, joints and drainage must suit the same application. These six checks help buyers compare quotations on more than appearance.

01 / LOW ABSORPTION

Water resistance

Reference water absorption is below 0.5%. Ask for the current test report for the supplied batch.

02 / DIMENSIONS

Consistent laying

Length, thickness, side straightness and rectangularity tolerances affect alignment and joint consistency.

03 / STRENGTH

Vehicle application

Flexural and breaking-strength results should be checked against the expected vehicle load and installed base.

04 / SURFACE

Grip and finish

Select a surface suited to covered or exposed parking, slope, rainfall and cleaning conditions.

05 / DURABILITY

Wear resistance

Abrasion, stain, chemical, colour and thermal-shock performance matter in frequently used outdoor areas.

06 / INSTALLATION

Complete floor system

A stable base, suitable adhesive coverage, drainage and planned movement joints reduce avoidable failures.

WHERE 400×400 PARKING TILES FIT

Plan the tile around the real site.

Use the balanced 400×400 mm format for broader entrances, medium or large driveways, garden parking and outdoor compounds where fewer joints and an open pattern are preferred. Confirm slope, vehicle type, traffic frequency and base preparation before selecting a 16×16 parking tile.

01

Home entrances

A balanced square format for broader entrances where a cleaner pattern and fewer visual breaks are preferred. Confirm grip for exposed or wet zones.
02

Residential parking

A popular proportion for residential car-parking layouts when the supplied specification matches the expected vehicle load and installed base.
03

Driveways

A practical choice for medium and larger driveways where a balanced joint pattern and efficient surface coverage matter.
04

Outdoor areas

Suitable for outdoor compounds and access areas when weather exposure, drainage, slope and surface finish are specified correctly.

PRODUCT BRIEF

Technical specifications for 400×400 parking tiles

The following technical reference applies to the parking-tile range. Test-method labels have been aligned with the applicable ISO 10545 parts. Request the current batch certificate before final approval, especially for breaking strength and any project-specific compliance requirement.

Read the buying checklist
PropertyInternational standardReference valueTest method
Deviation in length±0.6%±0.3%ISO 10545-2
Deviation in thickness±5.0%±5.0%ISO 10545-2
Straightness of sides±0.5%±0.5%ISO 10545-2
Rectangularity±0.6%±0.5%ISO 10545-2
Water absorption<0.5%<0.5%ISO 10545-3
Mohs hardness>6>8EN 101
Flexural strength>35 N/mm²>45 N/mm²ISO 10545-4
Deep abrasion resistance<175 mm³<144 mm³ISO 10545-6
Breaking strength1113 NConfirm batch certificateISO 10545-4
Density>2 g/cm³>2.4 g/cm³ISO 10545-3
Frost resistanceFrostproofFrostproofISO 10545-12
Chemical resistanceNo damageNo damageISO 10545-13
Thermal-shock resistanceNo damageNo damageISO 10545-9
Colour resistanceNo damageNo damageDIN 51094
Thermal expansion<9 × 10⁻⁶<6 × 10⁻⁶ISO 10545-8
Stain resistanceResistantResistantISO 10545-14
Moisture expansionNilNilISO 10545-10

400×400 PARKING TILE PRICE

What changes the final price?

A useful 400×400 parking tile quotation should show the rate per square metre or square foot, tiles per box and box coverage. The mathematical base is 6.25 tiles per square metre before full-box rounding, cutting, breakage and spare allowance.

01

Tile size and coverage

Tile dimensions affect pieces per square metre, box coverage and the final quotation.

02

Thickness and performance

Compare the exact supplied specification, not only the design name.

03

Order quantity

Retail, project, dealer and export quantities can use different packing and rate structures.

04

Packing and freight

Box coverage, palletisation, destination and transport all affect landed cost.

INSTALLATION AND CARE

Performance depends on the complete parking floor.

Installation checklist

  • Prepare a stable, level base designed for the expected traffic.
  • Set out the 400×400 grid across the full area so straight joints, drainage lines and perimeter cuts remain balanced.
  • Use an adhesive and method suitable for the tile and exterior conditions.
  • Achieve full support beneath each tile and avoid hidden voids.
  • Confirm joint width and movement accommodation for the broader 16×16 layout with the installer.
  • Verify batch, shade and calibre markings before installation.

Cleaning and maintenance

  • Sweep grit regularly to reduce surface abrasion.
  • Wash with clean water and a mild compatible detergent.
  • Remove oil and tyre marks promptly with a suitable cleaner.
  • Avoid unapproved strong acids that may damage joints.
  • Keep drains clear and prevent long-term standing water.
  • Inspect joints periodically and repair damaged areas early.

BEFORE REQUESTING A QUOTE

Bring four details. Get a useful recommendation.

01

Application

Home entrance, car parking, driveway or another outdoor space.
02

Site conditions

Covered or exposed, flat or sloped, dry or frequently wet.
03

Project quantity

Measured surface area plus installer-approved cutting allowance.
04

Delivery location

City and country, so packing and logistics can be discussed.

400×400 PARKING TILE FAQ

Questions buyers ask before choosing 16×16 parking tiles.

They are commonly used as the same market name. The technical dimension is 400×400 mm, equal to approximately 15.75×15.75 inches; 16×16 inch is the familiar nominal description.
They are considered for residential driveways, car parking, entrances, compounds and other outdoor floor areas. The chosen thickness, surface and installation system must match the vehicle load and real site conditions.
A 16×16 tile is not automatically suitable for vehicle use. Confirm that the quoted 400×400 product is made for parking, then check its body, supplied thickness, water absorption and current test report.
The technical reference for these 16×16 parking tiles lists water absorption below 0.5% under ISO 10545-3. Confirm the result for the exact 400×400 batch being supplied.
The larger 400×400 face does not by itself determine vehicle performance. Compare supplied thickness, flexural and breaking-strength results, vehicle load and base preparation; request the applicable ISO 10545-4 report.
Choose 16×16 ordinary parking tiles for practical coverage and restrained patterns. Choose 16×16 digital parking tiles when broader stone, wood or geometric designs matter. Apply the same grip, thickness and vehicle-use checks to both.
For 400×400 parking tiles, compare the rate per square metre or square foot, tiles per box and box coverage. Ordinary or digital design, thickness, order quantity, packing and freight also change the final price.
One 400×400 mm tile covers 0.16 square metre, so the mathematical base is 6.25 tiles per square metre. Actual ordering must be rounded to full boxes and include installer-approved cutting, breakage and spare allowance.
Plan the 400×400 grid across the full driveway so the broader module, straight joints and edge cuts remain balanced. Use a flat sloped base, full adhesive support, suitable outdoor joints and installer-planned movement accommodation.
Sweep loose grit, wash with water and a mild compatible detergent, treat oil marks promptly, keep drainage clear and avoid unapproved strong acids that may damage the joints.

Ready to compare the complete parking-tile range?

Return to the main collection to compare 300×300, 400×400, 500×500 and 600×600 mm formats.

Explore all parking-tile sizes

ParkingTile.com — size-led guidance for outdoor parking surfaces.

Home  ·  Specifications  ·  FAQs

Planning a driveway, parking area or project?

Share your required size, quantity and delivery location for a focused quotation.

Request on WhatsApp
ParkingTile.com

Parking tile manufacturer in Morbi, Gujarat, serving residential, commercial and project requirements since 2015.

Ordinary and digital parking tiles in practical size formats for driveways, entrances and outdoor parking surfaces.

Tile Sizes

12×12 Inch

16×16 Inch

20×20 Inch

2x2 Feet

Company

Home

About Us

Contact

Privacy Policy

Contact

+91 88661 52115

ankur@parkingtile.com

Pacific Business Park, 8-A, National Highway, below The Fern Hotel, Mahendranagar, Morbi, Gujarat 363642

Open WhatsApp

© 2026 ParkingTile.com. All rights reserved.

Parking Tiles · Morbi, India

;