HOME / 500×500 PARKING TILES

THE LARGE PARKING FORMAT

500×500 mm (20×20 Inch)
Parking Tiles

Explore 500×500 mm parking tiles—commonly known as 20×20 inch parking tiles—for large driveways, villa entrances, commercial parking and broad outdoor areas. Compare ordinary and digital designs, technical specifications, price factors and installation requirements in one place.

500 mm

Actual metric size

20×20

Common market name

Digital

500×500 mm

Primary product specification

≈ 19.69 in

Exact metric-to-inch conversion

20×20 in

Familiar nominal market name

Outdoor

Parking, driveway and entrance use

WHY THIS SIZE

A large-format module for open outdoor layouts.

The 500×500 mm format covers 0.25 square metre per tile, creating a broad grid with fewer joints across larger parking floors. It suits spacious driveways, villa entrances, commercial parking and open compounds where a clean, large-scale pattern is preferred.

Confirm grip, supplied thickness, tested performance, vehicle load and base design before ordering.

20×20 Inch

Large scale. Planned around open space.

The larger face gives stone, concrete and geometric patterns more room to read while reducing the number of joints. Accurate base flatness, drainage, full support and balanced perimeter cuts are especially important with this format.

PERFORMANCE CHECKLIST

What makes a 500×500 parking tile suitable for outdoor use?

A parking surface works as a complete system. The tile, base, adhesive, joints and drainage must suit the same application. These six checks help buyers compare quotations on more than appearance.

01 / LOW ABSORPTION

Water resistance

Reference water absorption is below 0.5%. Ask for the current test report for the supplied batch.

02 / DIMENSIONS

Consistent laying

Length, thickness, side straightness and rectangularity tolerances affect alignment and joint consistency.

03 / STRENGTH

Vehicle application

Flexural and breaking-strength results should be checked against the expected vehicle load and installed base.

04 / SURFACE

Grip and finish

Select a surface suited to covered or exposed parking, slope, rainfall and cleaning conditions.

05 / DURABILITY

Wear resistance

Abrasion, stain, chemical, colour and thermal-shock performance matter in frequently used outdoor areas.

06 / INSTALLATION

Complete floor system

A stable base, suitable adhesive coverage, drainage and planned movement joints reduce avoidable failures.

WHERE 500×500 PARKING TILES FIT

Plan the tile around the real site.

Use the 500×500 mm format for spacious entrances, large driveways, villa parking, commercial parking and open compounds where broad patterns and fewer joints are preferred. Confirm base flatness, slope, vehicle type, traffic frequency and full tile support before selecting a 20×20 parking tile.

Home entrances

A large square format for spacious home and villa entrances where broad stone, concrete or geometric patterns can be viewed clearly. Confirm grip for exposed or wet approaches.

Residential parking

Suitable for generous residential and multi-car parking areas when the supplied specification, thickness and installed base match the expected vehicle load.

Driveways

A practical choice for wide or long driveways where fewer joints, efficient coverage and a calm large-scale grid are priorities.

Outdoor areas

Consider for commercial parking, villa compounds, garden parking and broad courtyards when vehicle load, weather exposure, drainage, slope and surface finish are specified correctly.

PRODUCT BRIEF

Technical specifications for 500×500 parking tiles

The following technical reference applies to the parking-tile range. Test-method labels have been aligned with the applicable ISO 10545 parts. Request the current batch certificate before final approval, especially for breaking strength and any project-specific compliance requirement.

Property	International standard	Reference value	Test method
Deviation in length	±0.6%	±0.3%	ISO 10545-2
Deviation in thickness	±5.0%	±5.0%	ISO 10545-2
Straightness of sides	±0.5%	±0.5%	ISO 10545-2
Rectangularity	±0.6%	±0.5%	ISO 10545-2
Water absorption	<0.5%	<0.5%	ISO 10545-3
Mohs hardness	>6	>8	EN 101
Flexural strength	>35 N/mm²	>45 N/mm²	ISO 10545-4
Deep abrasion resistance	<175 mm³	<144 mm³	ISO 10545-6
Breaking strength	1113 N	Confirm batch certificate	ISO 10545-4
Density	>2 g/cm³	>2.4 g/cm³	ISO 10545-3
Frost resistance	Frostproof	Frostproof	ISO 10545-12
Chemical resistance	No damage	No damage	ISO 10545-13
Thermal-shock resistance	No damage	No damage	ISO 10545-9
Colour resistance	No damage	No damage	DIN 51094
Thermal expansion	<9 × 10⁻⁶	<6 × 10⁻⁶	ISO 10545-8
Stain resistance	Resistant	Resistant	ISO 10545-14
Moisture expansion	Nil	Nil	ISO 10545-10

500×500 PARKING TILE PRICE

What changes the final price?

A useful 500×500 parking tile quotation should show the rate per square metre or square foot, tiles per box and box coverage. The mathematical base is 4 tiles per square metre before full-box rounding, cutting, breakage and spare allowance.

Tile size and coverage

Tile dimensions affect pieces per square metre, box coverage and the final quotation.

Thickness and performance

Compare the exact supplied specification, not only the design name.

Order quantity

Retail, project, dealer and export quantities can use different packing and rate structures.

Packing and freight

Box coverage, palletisation, destination and transport all affect landed cost.

INSTALLATION AND CARE

Performance depends on the complete parking floor.

Installation checklist

Prepare a stable, level base designed for the expected traffic.
Set out the 500×500 grid across the full parking area so broad modules, drainage lines and perimeter cuts remain balanced.
Use an adhesive and method suitable for the tile and exterior conditions.
Achieve full support beneath each tile and avoid hidden voids.
Confirm base flatness, joint width and movement accommodation for the larger 20×20 layout with the installer.
Verify batch, shade and calibre markings before installation.

Cleaning and maintenance

Sweep grit regularly to reduce surface abrasion.
Wash with clean water and a mild compatible detergent.
Remove oil and tyre marks promptly with a suitable cleaner.
Avoid unapproved strong acids that may damage joints.
Keep drains clear and prevent long-term standing water.
Inspect joints periodically and repair damaged areas early.

BEFORE REQUESTING A QUOTE

Bring four details. Get a useful recommendation.

Application

Large driveway, villa parking, commercial parking or another broad outdoor area.

Site conditions

Covered or exposed, flat or sloped, dry or frequently wet.

Project quantity

Measured surface area plus installer-approved cutting allowance.

Delivery location

City and country, so packing and logistics can be discussed.

500×500 PARKING TILE FAQ

Questions buyers ask before choosing 20×20 parking tiles.

Are 500×500 mm and 20×20 inch parking tiles the same?

They are commonly used as the same market name. The technical dimension is 500×500 mm, equal to approximately 19.69×19.69 inches; 20×20 inch is the familiar nominal description.

What are 500×500 parking tiles used for?

500×500 parking tiles are considered for spacious driveways, villa parking, commercial parking, entrances and broad outdoor compounds. The supplied thickness, tested performance, surface and installation system must match the vehicle load and site conditions.

Are 500×500 parking tiles vitrified?

A 20×20 tile is not automatically suitable for vehicle use. Confirm that the quoted 500×500 product is made for parking, then check its body, supplied thickness, water absorption and current test report.

What is the water absorption of these parking tiles?

The technical reference for these 20×20 parking tiles lists water absorption below 0.5% under ISO 10545-3. Confirm the result for the exact 500×500 batch being supplied.

How strong are 500×500 parking tiles?

The larger 500×500 face does not by itself determine vehicle performance. Compare supplied thickness, flexural and breaking-strength results, vehicle load and base preparation; request the applicable ISO 10545-4 report.

Ordinary or digital parking tiles—which should I choose?

Choose 20×20 ordinary parking tiles for practical coverage and restrained patterns. Choose 20×20 digital parking tiles when broader stone, wood or geometric designs matter. Apply the same grip, thickness and vehicle-use checks to both.

What affects 500×500 parking tile price?

For 500×500 parking tiles, compare the rate per square metre or square foot, tiles per box and box coverage. Ordinary or digital design, thickness, order quantity, packing and freight also change the final price.

How many 500×500 tiles are required per square metre?

One 500×500 mm tile covers 0.25 square metre, so the mathematical base is 4 tiles per square metre. Actual ordering must be rounded to full boxes and include installer-approved cutting, breakage and spare allowance.

How should parking tiles be installed?

Plan the 500×500 grid across the full driveway so the broader module, straight joints and edge cuts remain balanced. Use a flat sloped base, full adhesive support, suitable outdoor joints and installer-planned movement accommodation.

How do I clean and maintain parking tiles?

Sweep loose grit, wash with water and a mild compatible detergent, treat oil marks promptly, keep drainage clear and avoid unapproved strong acids that may damage the joints.

Ready to compare the complete parking-tile range?

Return to the main collection to compare 300×300, 400×400, 500×500 and 600×600 mm formats.

ParkingTile.com — size-led guidance for outdoor parking surfaces.

Home · Specifications · FAQs

500×500 mm (20×20 Inch)
Parking Tiles

A large-format module for open outdoor layouts.

Large scale. Planned around open space.

What makes a 500×500 parking tile suitable for outdoor use?

Water resistance

Consistent laying

Vehicle application

Grip and finish

Wear resistance

Complete floor system

Plan the tile around the real site.

Home entrances

Residential parking

Driveways

Outdoor areas

Technical specifications for 500×500 parking tiles

What changes the final price?

Tile size and coverage

Thickness and performance

Order quantity

Packing and freight

Performance depends on the complete parking floor.

Installation checklist

Cleaning and maintenance

Bring four details. Get a useful recommendation.

Application

Site conditions

Project quantity

Delivery location

Questions buyers ask before choosing 20×20 parking tiles.

Ready to compare the complete parking-tile range?

Planning a driveway, parking area or project?

Tile Sizes

Company

Contact

500×500 mm (20×20 Inch)Parking Tiles

A large-format module for open outdoor layouts.

Large scale. Planned around open space.

What makes a 500×500 parking tile suitable for outdoor use?

Water resistance

Consistent laying

Vehicle application

Grip and finish

Wear resistance

Complete floor system

Plan the tile around the real site.

Home entrances

Residential parking

Driveways

Outdoor areas

Technical specifications for 500×500 parking tiles

What changes the final price?

Tile size and coverage

Thickness and performance

Order quantity

Packing and freight

Performance depends on the complete parking floor.

Installation checklist

Cleaning and maintenance

Bring four details. Get a useful recommendation.

Application

Site conditions

Project quantity

Delivery location

Questions buyers ask before choosing 20×20 parking tiles.

Ready to compare the complete parking-tile range?

Planning a driveway, parking area or project?

Tile Sizes

Company

Contact

500×500 mm (20×20 Inch)
Parking Tiles